Machining copper parts
The factory has the most advanced machining center,When the parts
are machined by machine, they comply with ISO 2768 (standard, fine)
and ISO 286 (Grades 8, 7 and 6) .At the same time, the dimensions
of the parts shall comply with the dimensional tolerances
identified in the PDF file.
The factory has passed ISO 9001 certification. Our quality
assurance department provides strong quality assurance, and the
dimensions of machined parts will be checked.
- wide range of CNC turning materials
Material available
| Aluminum | AL6061, Al6063, AL6082, AL7075, AL5052, AL6082-T6 etc. |
| Stainless Steel | SS201,SS301, SS303, SS304, SS316, SS416 etc. |
| Steel | mild steel, Carbon steel,12L14, 12L15,4140, 4340, Q235, Q345B, 20#,
45# etc. |
| Brass | HPb63, HPb62, HPb61, HPb59, H59, H58,H68, H80, H90 etc. |
| Copper | C11000,C12000,C12000 C36000 etc. |
| Plastic | ABS, PC, PE, POM, Delrin, Nylon, Teflon, PP,PEI, Peek etc. |
Surface finish
| Aluminum parts | Stainless Steel parts | Steel parts | Brass parts |
| Clear Anodized | Polishing | Zinc plating | Nickel plating |
| Color Anodized | Passivating | Nickel plating | chrome plating |
| Sandblast Anodized | Sandblasting | Chrome plating | Electrophoresis black |
| Polishing | Laser engraving | Oxide black | Oxide black |
| Brushing | Electrophoresis black | Carburized | Powder coated |
| Chroming | Oxide black | Heat treatment | |
| Chemical Film | | Powder Coated | |
CNC Machining centers can process a variety of metals and plastics,
including:CNC machining Aluminium
EN AW-2007 / 3.1645 / AlCuMgPb
EN AW-6061 / 3.3211 / Al-Mg1SiCu
EN AW-6082 / 3.2315 / Al-Si1Mg
EN AW-5052 / Al-Mg2.5
EN AW-7075 / 3.4365 / Al-Zn6MgCu
CNC machining Steel
1.0038 / St37-K / S235JR
1.0503 / C45
1.0570 / St52-3 / S355J2G3
CNC machining Stainless steel
SS303
SS304
SS316
CNC machining Copper and Brass
CNC machining plastic
ABS
PTFE / Teflon
Delrin / POM / Acetal
Ultem/PEI
Nylon / Polycaprolactam
PC / Polycarbonate
PEEK / Polyether ether ketone
PMMA
PPSU
